Beep!

Noise is always a bit of a problem in Spain, especially in flats which, although built with reinforced concrete, seem to ring like a bell with sounds travelling vast distances through the structure!

But I have found a new sound to add to my collection of dogs and babies.

By about 6am on most mornings, I'm starting to wake up which is rather on the early side. At exactly 5:50, for the past few weeks, I've heard the sound of a car followed by a "beep" on the horn - rather annoying although I'm on the 4th floor. I assumed it was someone picking up a friend and the beep was to tell them that they had arrived. Since it is always at the same time and sufficiently accurate for me to set my clock to it (I would do so if it wasn't for the fact that my clock is tuned to the atomic time which is transmitted from Rugby in the UK), I thought that it would be unnecessary to announce the arrival.

One morning, I leaped out of bed and, on hearing the beep, went out onto the balcony - it was very cold - but there was no car. Very mysterious.

Then, two days ago, having given up going back to sleep, I lay in wait for the mystery car. At exactly 5:50, I heard a car being started and then it came into view. Beep. It drove off down the road. At least I got a view of the car; it was a large dark-coloured saloon.

I assume that the driver is saying goodbye to their partner but who knows?

My only solution is to post a note on what I think is the offending car in the evening saying "Please don't beep your stupid horn when you drive past my flat", and "by the way, why do you do it? I want to finish writing a post on my Blog and my readers won't be satisfied until they know the answer." Of course, there's no guarantee that I get the right car. The only alternative is to stand in the middle of the road at 5:50 in the morning.

By coincidence, at 5:30, sometimes I'm woken by noises from a flat above me. It's difficult to tell which one it is as sound travels around the building in rather a peculiar way but I reckon it's my neighbours above who are connected with the dreaded beep. A couple of nights ago it was loud - I'm not absolutely sure it's always the same car!

27 Feb

Manuel, who is the president of the community very kindly re-wrote the notice that I sent him and he posted it on the door today. So, let's see what happens now. If you don't understand Spanish, basically it says that, if it's you making this beep, then please don't. And, by the way, why do you do it? - I'm interested. Is it saying goodbye to your partner? This will test if the Spanish (or Rumanians) have a sense of humour because it's all done with good humour - I'm not angry about it. It really isn't that important, just strange!

28 Feb
No beep this morning. I think the problem is solved!

Frames and Canvas

Picture Framing

For my own paintings, I make my own frames. Life would be very expensive if I had to send off my pictures to be framed professionally each time. This applies mainly to watercolours and acrylics as I usually paint oils on "3D" canvas which doesn't require a frame. More about that later.

Some artists paint their pictures to match one of the standard sizes that one can buy in the shops.

I read a Forum recently about framing which asked artists if they framed their own material. There were several replies by picture framers, one of which said that "artists know nothing about framing", which I thought was a bit of a cheek (but it made me laugh!). Well, they would say that, wouldn't they? Pere, a carpenter in the village where I live makes three profiles for me which I've published on my web-site: http://www.mezcla/framing_UK.html l buy these in 3m lengths and then cut them to size on my mitre saw. I have to be careful the cut doesn't get distorted by movement of the wood or the blade; it's not ideal. I did have a look at power mitre saws which would give a more precise cut but they were all a bit fearsome for what I wanted. For watercolours, I mount the picture conventionally with mount-board and 2mm glass which, conveniently, I also buy, cut to size, at a really good price from Pere.

For acrylics, which often I paint on 3mm MDF, I have a frame profile (B) which creates a kind of display case where the picture is actually mounted on a backing board a little behind the glass. I know there is nothing terribly original about this but I like it a lot.

Canvasses


Now to another order that I place with Pere. I've recently become interested in making my own canvasses. What converted me was going to a shop in Girona to find that a 50x50cm (x35mm) "3D" canvas was almost €18. From Barna Art in Barcelona, the price is €10 but one has to allow for shipping. From the UK, the price drops to €8 if one buys a pack of 5 but the shipping costs are prohibitive. There was only one thing to do. I went back to Pere and ordered some profiles 35mm thick to match the side of the canvas which I can cut on my mitre saw.

On my last trip to Barcelona, I went to Barna Art, which is not far from the Metro at Paseig de Gracia, just a walk away. Not only did I spend a leisurely time looking at different materials, cotton and linen, both primed and unprimed but I also managed to pick up one or two tips about making my own canvasses. I was keen on buying unprimed material as I had learnt that the material would shrink on the frame (bastidor in Spanish) after being primed. Normally the wood frame is referred to as made up of "stretcher bars" which implies that they can be adjusted after the material has been fitted. But I'm not buying stretcher bars as this limits me to the size of canvas that I can make unless I hold a large stock or wait for the shipment to arrive. My profiles don't stretch; they are completely rigid, being glued and stapled at each corner. Another item that has always intrigued me is the wedge that gets slotted into each corner of the bastidor. When I used to buy ready-made canvasses, often the wood frame appeared to be so rigid that it would be impossible to stretch it even if one bashed the wedges into the corners. I think I understand their role better now. I suspect it is more a case of "locking" the wood frame into a rigid and square shape, rather than actually increasing the dimensions after the canvas has been purchased. If the material has been fitted well and stretched onto the bastidor, then it shouldn't be necessary to stretch it further. Well, that's my story, and I'm sticking to it!

As you can see from the photo, I came back with a good selection of samples and material; a mixture of linen and cotton both primed and unprimed. I started off by making up a couple of canvasses using frames from which I'd removed the original material due to failed paintings. I used unprimed material and, having seen the shape of a frame which had been distorted due to too much shrinkage, I was careful not to stretch the material too much but I found that, after priming, the material (each a different type) had shrunk by different amounts. But not by a great amount. So, obviously one can't depend on shrinkage to achieve a tight canvas. Since my profiles are quite thick and strong, I use my stretching tool whether or not the material is primed. But, a word of warning, don't stretch the material too much if it is unprimed and the frame isn't very strong as it could well distort the wood after the primer has dried.

Another advantage of making my own canvasses is just what I've described. That is, if a painting is a failure, then the whole canvas isn't a write-off. I just rip the material off the frame and stretch a new canvas.

Rather like framing my own watercolours, it all feels part of the creative process.

Here is a photo of my bastidor-making department, I'm waiting for the glue to set. Then I'll turn the frame over and bang a strong staple across each corner. I guess I should be using corner clamps, that will be next time. I just wrap masking tape around the corners to hold them together.

The bastidor on the table is 50 x 28 cm which represents an aspect ratio of 16:9, the same as a widescreen TV. I imagine a great deal of time was spent choosing the most pleasing ratio for television screens so I thought I would copy it. My "mini" paintings on MDF are also 16:9 (24 x 13.5 cm).
 

New Painting Discoveries

Like all budding artists, I've discovered that the internet is full of art classes, information and tutorials. I wanted to make my own canvasses so I went on a search for the same. I watched a video of a young woman who didn't seem to have a work bench, instead she made her frames on the floor of her workshop using a power mitre-saw. Everything she did was on the wooden floor. I did discover one useful tip and that is that (naturally) the material, whether it be cotton or linen, will shrink after it has been primed. So I decided that the best bet was to buy my material unprimed and then prime it after I had fixed it to the frame (bastador in Spanish). I have a local carpenter who makes the wood profiles which I can then chop into whatever size I want without having to wait for a delivery.

As part of my search, I came across painting.about.com . It comprises a very friendly art site administered by an artist/teacher who provides help and advice in addition to organising many different tutorials. I had a browse and decided to submit a painting in response to a "Painting Challenge". There is a selection of photographs and the artist is invited to provide their own version and post it on the site. I uploaded my painting and received a rapid response. So, I followed the advice and did it again and submitted the second version: http://painting.about.com/u/sty/paintingphotoschallenges/painting-photos-challenge5/An-Alternative-Bridge-by-Steve-Meza.htm?r=un2

If you follow my blog and you're interested in art, I can recommend this site. It feels quite intimate which is unusual for the internet. One is used to numbers in millions and yet there were only 12 other versions of this particular photograph and I ended up swapping e-mails with the teacher. Why look further? I'm hooked! I'm sure there are many other similar sites but I'm happy with this one.

Back to canvasses. I went to Barcelona yesterday to buy canvas (ie cotton and linen) from Barna Art and then met a friend and went to the Miró exhibition at the Fundació Miró in Montjuic. This is a superb exhibition (if one like surrealism) and the usual paintings were augmented by many more which were borrowed from galleries around the world. Previously it had been in London at Tate Modern and it was due to move to Washington, USA in May. Aren't I lucky, living so close to Barcelona!

I really liked Miró's early work but I found videos of him burning canvases and daubing paint on the side of buildings in later life rather sad. I bought a book of his pictures and the story of his life (in Catalan) so I will have to swot up on my non-existent Catalan. It was only €8 so I couldn't resist it.

Swimming

As part of my keeping fit (I hope!), I go swimming about once a week at the Piscina Municipal de Girona. I only heard about the pool from the lifeguard at Celrà outdoor pool during the summer when it was about to close for the season. Previously I went to the pool at Salt, which is a "suburb" of Girona, but is was much more expensive, probably because it also included the gym which I never used. When one is used to cycling down country lanes, I can't understand the appeal of cycling and not going anywhere!

Anyway, back to Palau. On Wednesdays I meet my friends from Girona Grapevine for coffee in Girona and then I catch a bus to the area around Decathlon, Bauhaus and Media Markt. I always enjoy browsing around Meda Markt, even if there's nothing I need to buy. I have lunch at McDonald's (shock, horror) and then take the short walk to the pool, having wandered around the stores to let my lunch settle down.

Since I'm over 65, I only pay €31 a year for the membership at the pool which is great value. Normally there are six lanes open, labelled Slow, Medium and Fast but, on Wednesdays, there's an aquarobics class which takes up half the pool, so it's not the best time to go. Apart from concentrating all swimmers into three lanes, the class makes the water rather choppy; more like swimming at sea! Fortunately, normally there are only around six swimmers at any one time, so it doesn't get too crowded even with the class in action. I normally end up in the Medium speed lane but I can't swim more than 2 lengths without taking a breather. Maybe I should swim more slowly but I'm then in fear of sinking!

During the summer months, I go to the outdoor municipal pool in Celrà which is superb. One can easily avoid the busy times when the pool is full of children so I can swim several lengths without too much traffic!

Later.....
I added this paragraph after returning from my trip to Girona. I was at McDonald's and, as I looked up at their name on the side of the building, I realised I had left off the apostrophe earlier in this post. So I added it just now while no one was looking. This is a contentious issue in the UK at present with the book shop Waterstone's removing their apostrophe! You see, McDonald's actually belongs to someone called McDonald... I think.

Cycling

I used to have a regular theme with a friend in the UK. Not having a family of my own, from time to time, I would send her a photo by e-mail of my bike parked at some beach or another, in place of a family photo. When I stayed in Ibiza on holiday, I sent her a photo of my bike in Formentera. I cycled from Santa Eulalia, where I was staying, to Ibiza Town, took the ferry to Formentera and then rode right up to the lighthouse at the far end of the island, which is a fairly steep climb. This was a great adventure - I did it twice in total. Having said that, I ought to have a photo of my bike here but I'll have to wait till next time. It's an old Peugeot racing bike which I'm very attached to.

Now that I live in Spain, my cycling is in the immediate area of the Costa Brava, between Girona and the coast. This morning, I went on my regular 37km circuit. The sun was warm but the air was cold so I had to wear loads of gear, including black tights. My route takes me, firstly, to Bordils which is the next town in the direction towards the coast. Then I take the long climb up to Madremanya and try to reach the top in about 30 minutes. After that, it's downhill all the way to Monells and then there's a flat section which takes me to Corça where I re-join the C66, the main road to Palafrugel. After less than a km, there's a roundabout where I turn right but this is the moment of decision in the summer. If I'm feeling fit, I carry straight on to la Bisbal (where there are all the pots outside the shops) and continue to Playa de Pals where I sit on the beach most of the day!

But today was not beach weather! So I carried on to Parlava and then turned left for home. This is a deceptive stretch of road which I don't like very much. It looks like a very gentle uphill climb but, by the time I reach the turning for Foixa, I'm panting for breath (well, I am 68!) I pass the picturesque old town of Foixa and then there is a very steep climb out of the village which I have to take with my very lowest gear.

Then there's a long decsent through the woods, past St Laurenc, where, on a Sunday, men are out shooting (presumably) wild boar. I arrive in Flaça and then it's plain sailing, I re-join the C66 again and pass through Bordils.

I often see other bikers, some look very young and fit - there are several professional racing teams based in Girona.

Unfortunately I'm rather limited in the routes that I can take. The road to Girona, to me, is too dangerous with various turnings off to other main roads and there's not much to see in that direction anyway. Who wants to cycle in Girona?

But my favourite trip is Pals and back in a day. Apart from the lure of the beach and sea, I have friends there. I don't have a car so that is the only opportunity I have to see them, unless they come to see me, of course.

Watercolour & Colour Mixing

The subject of colour mixing, especially with watercolour, is a great passion of mine and there are many excellent sites which explain it well. I didn't really understand colour until I read "Blue and Yellow Don't Make Green" which is a kind of industry standard. I thought that colour mixing was rather like the additive colours of Red, Blue and Green on a TV screen but in reverse, on paper. Then I realised that the only reason one gets Green by mixing Blue and Yellow is because of the "impurities" (ie Green) in the Blue and Yellow paints. Similarly with the other primaries. I really like the idea of a 6-colour palette because it reinforces this theory really well. One only gets a decent Green by mixing a Blue which "leans" towards Green and a Yellow which does the same.

A cook would tend to use pure materials for preparing dishes rather than ready-made meals (such as I would use!) The same goes for colour. If I were an art teacher, (I think I would be something of a tyrant!) I would tell my students to get to know and love the names of original pigments and use them as a kind of colour toolbox. I would tell them to avoid ready-mixed paints, Sap Green is often used as an example; each manufacturer has its own version. Most of my greens (we're not talking about food now) originate from a powerful green such as Viridian or Winsor Green which is rather too strong and "acid" to be used on its own. But, mixed with various yellows and browns, it produces a marvellous range of greens. Add a little red (the complement of green) to darken the colour. Winsor & Newton Winsor Blue (Green Shade) is another pure pigment to mix with yellows to produce greens.

Also, as my imaginary art teacher, I would tell my students that, since they have saved lots of money by buying only six or so colours, then they can afford to buy Artists' Quality paints. Even if you are starting out, if you can afford it, treat yourself to decent materials and it will inspire you.

I really don't like Cadmium Yellow, it is opaque and produces a chalky finish. So I went on the search for a transparent yellow and came across Azo Yellow Medium from Rembrandt which is superb. I feel the same about Cadmium Red and Cadmium Orange which are also rather opaque. Rembrandt paints are available in the art shops here in Girona but I'm not sure where to buy them in other parts of the world. Rembrandt is the Royal Talens artists' grade, Van Gough is the students' grade.


So, my suggested 6-colour palette would be the following:

Red: (Rembrandt) Permanent Red Light and Quinacridrone Rose or (W&N) Cadmium Red and Magenta. (But I find Cadmium Red tends to be opaque so it's worth looking for a more transparent red).


Yellow: Azo Yellow Medium and Lemon Yellow.

Blue: Cobalt Blue and Cerulean Blue.

But I would cheat and add a green, but only one. I would include Viridian or Winsor Green which I mentioned above. 

But I write this in all humility; this is only what I've found and there are many suggestions by artists and teachers on the internet or in books. In any case, what you find best for you is the most important thing! Anyway, I must own up and say that I have far more than 7 colours in my box (we're talking about watercolours here).

Another favourite book of mine is "Making Color Sing". I usually have blobs of the three primaries of Red, Blue and Yellow arranged in a circle in my paint box tray and use them to create an array of greys by "dragging" bits of each colour into the centre of the circle.

 

For blacks, I don't use black. I've used Paynes Grey from time to time but it produces images which are just too strong. Instead I start with an empty whole pan and squirt two complementary colours into each end of the plastic pan and mix them in the middle. Blue and Brown aren't exactly complements but they make a nice range of darkness which is similar to Paynes Grey. Quinacridone Red and Viridian make a marvellous deep nothingness! When mixing colours, don't mix them too thoroughly, let a bit of the original colours remain. This makes a much more interesting result.

Paper

One problem that I have hit regarding paper is that, sometimes, a paper will become absorbent (or else it was always that way). This is a disaster for watercolours as the paint rapidly gets sucked into the paper as if it were a sponge rather than remaining on the surface for a while (to enable it to be mixed with other colours, for example). The result is a very dull colour. I found some of my expensive papers have done this, whether it's because of a damp environment or for other reasons I don't know. But I always test my paper in all four corners with a blob of dilute paint before starting. I used a paper recently which was ok on the left hand side but it was was absorbent on the right! I reckon my test blobs should remain on the surface for at least a minute. I just tested one of my favourite papers and, after two minutes, the paint is still wet on the surface.


I haven't put any links on this posting as I'm sure you can search for all these things yourself. Good luck!

Acrylics

Acrylics are my least favourite medium but I have a box full of them so I can't let them go to waste, can I? I reckon they need doctoring to look decent. On their own, they dry too quickly (use a retarder), frequently they form as a blob on the end of the brush, too thick (use a flow enhancer) and they look dull on the resulting painting (use a gloss medium). Ah, that's better!

I do use decent quality paints, I have Liquitex colours which have a creamy consistency and also I have Rembrandt acrylics. But somehow they still fail to inspire me and the resulting painting still ends up looking dull and boring. Add a comment if you know what I'm doing wrong (apart from using them in the first place). Maybe I should be using them in more of a graphic design environment. Colour mixing in watercolours is a joy but, due to their opaque quality, mixing acrylics just doesn't work in the same way.

For a palette, previously I used a piece of 5mm toughened glass which was made to measure to fit a Tupperware container. It sat on top of a white-painted base just below the lip of the container and, below it is a water reservoir to keep the atmosphere humid. The paints stayed liquid for several days but once the lid was opened, you can guess what happened! The water is treated with a mould killer. I use the same type of glass for my oils palette. I went to Vidrieries Girona for the glass and it wasn't expensive.

After... I've changed my acrylic palette. I now use greaseproof paper (papel vegetal in Spanish) instead of glass, in common with many acrylic artists, and lay it on top of a dampened sponge. This keeps the paints moist even when open to the air as the paper allows a limited amount of water to pass through it. So.. forget my glass plate! That was a mistake.

But I will persevere with acrylics because, uniquely, they give me the opportunity to make small changes to a painting which are simply not possible with watercolour and which take too long with oils, with the layers mixing. I've tended to use primed MDF as a surface, which I describe in my oils posting, but I think I will try painting acrylic on watercolour paper instead.

On a shopping trip to Girona, I bought several "squeezy" bottles and loaded them with Liquitex Slo Dry, Flow Aid (diluted 1:20 as in the instructions) and Titan (huge Spanish paint company) Gloss Medium. The water here is very hard, full of calcium, so I used distilled water for my solution. I even pre-mixed Slo Dry and Flow Aid in the same bottle as an experiment! I only use my water container for washing brushes now. You can see the Tupperware container that I use for my palette plus a book for making notes. It's all rather like mixing chemicals in a photographic darkroom - I'm far more optimistic now with my new toolkit!